طريقة عمل حزام للفساتين ، عمل حزام بغرزة السنارة ، خطوات عمل حزام للفستان

[مبدعة التريكو]

طريقة عمل حزام للفساتين ، عمل حزام بغرزة السنارة ، خطوات عمل حزام للفستان

ريقة عمل حزام للفساتين ، عمل حزام بغرزة السنارة ، خطوات عمل حزام للفستان

طريقة عمل حزام للفساتين ، عمل حزام بغرزة السنارة ، خطوات عمل حزام للفستان
طريقة عمل حزام للفساتين ، عمل حزام بغرزة السنارة ، خطوات عمل حزام للفستان




خياطة حزام للفستان مزين بشغل الصنارة




http://forum.hwaml.com/imgcache2/hwaml.com_1346716214_916.jpg
Step 1. Take a strip of plain fabric and fold it in half with wrong sides facing. Lightly press the folds in the middle of the strip.

http://forum.hwaml.com/imgcache2/hwaml.com_1346716214_971.jpg
Step 2. Start times and use of the folds in the center of the strip as a guide for times and LONG RAW edges of the cloth toward the center fold. Press.


http://forum.hwaml.com/imgcache2/hwaml.com_1346716214_341.jpg
Step 3. Repeat steps 1 and 2 using a strip of patterned fabric. (In the photo below, I used bias binding Kettle for this band of tissue ... you need size 22mm offset mandatory maker 2 "wide strip.)


http://forum.hwaml.com/imgcache2/hwaml.com_1346716215_241.jpg
Step 4. Take a simple strip of open and folded edges. Place of band interaction on the other side of the center strip.


http://forum.hwaml.com/imgcache2/hwaml.com_1346716214_244.jpg
Step 5. Re times the plain strip so that the interaction is included.


http://forum.hwaml.com/imgcache2/hwaml.com_1346716214_534.jpg
Step 6. From the wrong side of the plain and patterned stripes facing, pin stripe patterned on a plain strip. Make sure that the patterned strip and still largely above the plain strip.


http://forum.hwaml.com/imgcache2/hwaml.com_1346716214_693.jpg
Step 7. Sew strips together to sew about 1 / 8 "from the edge of one side of a patterned strip.


http://forum.hwaml.com/imgcache2/hwaml.com_1346716214_306.jpg
Step 8. Sew 1 / 8 "from the edge of the opposite side of the patterned strip.


http://forum.hwaml.com/imgcache2/hwaml.com_1346716215_533.jpg


http://forum.hwaml.com/imgcache2/hwaml.com_1346716215_814.jpg
Step 10. Sew lace trim on the belt by stitching close to one long cut.

http://forum.hwaml.com/imgcache2/hwaml.com_1346716214_370.jpg
Step 11. Slip D-rings at one end of the belt so that the flat edge of the D-ring sitting on the patterned side of the belt.

http://forum.hwaml.com/imgcache2/hwaml.com_1346716214_881.jpg
Step 12. Fold the raw edge of the belt under 1 / 4 ", and then again for the D-ring about 1 / 2". Pin in place.

http://forum.hwaml.com/imgcache2/hwaml.com_1346716214_260.jpg
Step 13. Sew the folded edge across the belt as close as possible to the D-rings as you can get. You may find it easier to use a lightning pace on the sewing machine, sew close to get to the D-rings.

http://forum.hwaml.com/imgcache2/hwaml.com_1346716214_211.jpg
Step 14. Hem the other end zone, putting raw edge under 1 / 4 ". Again by another 1 / 2" and sew.

http://forum.hwaml.com/imgcache2/hwaml.com_1346716214_417.jpg
And you did! Super fast and easy sewing project - to try to stop in one!
http://forum.hwaml.com/imgcache2/hwaml.com_1346716215_604.jpg
http://forum.hwaml.com/imgcache2/hwaml.com_1346716215_193.jpg